The EVGA Superclock CPU Cooler M020-00-000234 pre-order is finally available. EVGA is my favorite company for motherboards and graphic cards. Great tech support and forums, and product warranty. Especially, a great line of products for gamers and overclockers.

The new EVGA Superclock CPU Cooler fits several recent CPU sockets, and built for easy installation. I added at the bottom a good “How to install” video by HiTechLegion. It can be installed in a breeze, just a few minutes and comes with its own CPU thermal paste compound.

One important thing for you to know: You require a computer case that allows open access to the back of the motherboard. Otherwise you might have to remove the motherboard (which doesn’t sound cool in your case).

What’s amazing about this new EVGA Superclock CPU Cooler is that it was tested versus a Standard i7 CPU Cooler at full load. The results are stunning. With the i7 CPU Cooler the computer’s internal temperature reached 70 F temperature at full load. With the EVGA Superclock CPU Cooler, the computer’s internal temperature was nigh 20 degrees lower !!! The comparison chart shows only 52 degrees Farenheit.

Introducing the latest entry into the award winning EVGA enthusiast product lineup; the EVGA Superclock CPU Cooler. This product was built to perform with five 8mm heatpipes that are arranged to receive the maximum airflow, direct-touch base technology providing excellent thermal transfer, wind tunnel fin design for optimal air-flow and more.

The center section of the fins form an enclosure in front of the fan hub where air flow is at its lowest, and the edges of the fins are closed. This creates two wind tunnels that maximize airflow around the heatpipes.

And of course, the full sleek black look and PWM controlled red LED fan are the perfect match for any EVGA gaming rig!

EVGA Superclock CPU Cooler Specs

  • Intel CPU Compatibility: Socket 775, 1155, 1156, 1366
  • AMD CPU Compatibility: Socket 754, 939, 940, F, AM2, AM3
  • Fan Size: 120 x 120 x 25mm
  • Fan Speed: 750 – 2500 RPM
  • Fan Airflow: 26 – 84 CFM
  • Heat Pipes: 5 x 8mm Direct Touch
  • Fins: Aluminum / Wind Flow

Fan Specs

  • Size: 120 x 120 x 25mm
  • Fan Control: Via Motherboard PWM
  • Fan Voltage: 12v
  • Max Current: 0.32A
  • Noise Range: 13.2 – 41.5 dBA
  • Speed range: 750 – 2500 RPM
  • Airflow Range: 26 – 84 CFM
  • Bearing: Hydraumatic
  • Life: 30,000 Hours

Heatsink

  • Fin material: Aluminium
  • Heat Pipes: 8mm Copper
  • Direct-touch base technology